Hello! everybody, i am a newbie in this for and i need help recently my client purchased sentinel HL MAX micro and i tried to emulate it without the dongle with multikey but it shows 0007 error i installed .Reg key created with h5dump installed multikey 18.0 registered .reg but virtual usb multikey remains and no alladin usb appears here is the log SRM Code: Sentinel SRM/HASP/HL Dumper v.1.3 b (private) build on (17:36:29 Aug 10 2014) >>>> START SENTINEL HASP DUMPING <<<< Found: SafeNet Inc. USB Key (0) And trying to read it... Success to open device... Key Type: 0xEA Vendor ID: 69020 (00010D9C) Hasp key ID: 1259635015 (4B148147) FW Revision: 4.31 HW Revision: 7.2.0 Dongle Form: 39 (27) Dumping, please wait ... RW memory size: 4032 (0FC0) (6) RO memory size: 2048 (0800) (7) Feature number: 11 (000B) | 3 (0003) Read sysinfo: OK (code 00), (status 0) Read RW memory: OK (status 0) Read RO memory: OK (status 0) Saved Dump_EA_69020_0.dmp HASP Code: Sentinel SRM/HASP/HL Dumper v.1.3 b (private) build on (17:36:29 Aug 10 2014) >>>> START HASP 4/HL DUMPING <<<< Dumping Password: 071D 40F2 Dumping with legacy API... IsHasp: OK (status 1) GetHaspStatus: OK (status 4) API version: 8.10 Port number: 00C9 (201) Key type: HASP4 M4 (04 01) HaspGeneration: HASP4 is connected HASPNetStatus: Connected key is not a HASP4 Net HaspID: 4B148147 (hex), 1259635015 (decimal) HaspCode: OK HaspEncodeData: OK HaspDecodeData: OK MemoHaspRead 1: OK (status 0) Memory Size: 00F8 (248) (status 4) MemoHaspRead 2: OK (status 0) TimeHaspID: FAIL (status -29) TimeHaspRead 1: FAIL (status -29) TimeHaspRead 2: FAIL (status -29) Finish dump with legacy API!!! Dumping with low level API... Open device: OK (status 0) Login: F001 (61441) On Value: 0001 (1) Dongle Type: 00EA (234) Memory Size: 0FD0 (4048) HASP HL Memory: Reading... Logout: OK Close device: OK (status 0) Write hasp.dmp Write hhl_mem.dmp Sending to solver hasp.dmp Solver return also i am confused with the type of hardware: h5dump says *HASP4* but some other devices says HASP SRM. but both HASP 4 and SRM dumps the dongle here i attach both the files Attaching the SRM TABLE too help needed, please
Hi Dear Eddy, I have the same issue. Could you please, share the dumpers and tools to convert to registry and extract the tables. My mail: samathmane@gmail.com Thanks in advance