File Splitter and Merger

Discussion in 'C' started by Jaihind, Aug 26, 2006.

  1. Jaihind

    Jaihind New Member

    Joined:
    Aug 4, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    0
    File Splitter is a very useful utility application for downloading . User want to download and store the downloaded files into Floppy disk , Its possible only if the downloaded file size is Less than or equal to 1.38 MB , If file size is more than the floppy disk size then File Splitter is required.

    File Splitter and Merger performs the following tasks

    1) Read the Original File and Find its File Size
    2) Creates new files for writing depending on target file size splits needed
    3) Allocate memory for newly created files depending on file size
    4) Read original file information and write their content to newly created files
    5) Stores splited file content into floppy disk
    6) Finally join the splited file into original file
    ( Read splited files and write splited file information into a single file )

    File Splitter and Merger Consist of the Following Modules
    a) Auto Splitter
    b) Custom Splitter
    c) Merger

    Auto Splitter
    Auto file spitter splits the file automatically according to the source file size.

    Suppose , If the user Read Red.txt file

    The System Reads File Size and Display the file size : 3 MB the original file( Red.txt )

    Splitted into Three Pieces of files :
    Automatically creates three file names ( Red1.txt, Red2.txt and Red3.txt). And divides original file size by three. Resultant file size to allocate dynamically three pieces of files.

    File Name :Red1.txt File Size1 :1 MB
    File Name :Red2.txt File Size2 :1 MB
    File Name :Red3.txt File Size3 :1 MB

    After Splitting the file the merger merges the above files into original file format.

    Custom Splitter
    Custom splitter splits the files depending upon the customer requirements. If the users want three pieces of files depending upon the file size. The Original File Split into 3 Pieces of files. Other procedures same as the above Auto Splitter after splitting the file the merger merges the above files into original file.

    Merger
    Merger merges the splitted file into original single file. Merger reads splitted files information and writes into single original file.

    Sample Code:

    Auto File Splitter
    Code:
    void ReadAuto(){
    	cout<<"\nEnter the name of the file "<<endl;
    	cin>>filename;
    	Access(filename);
    	_stat(filename,&buf);
    	size=buf.st_size;
    	cout<<"\n\nTotal File Size : : "<<size<<endl;
    	autosplit(filename,size,piece);
    }
    // Auto Splitter
    
    void autosplit(const char *filename,unsigned int size1,int piece)
    {
    	size1=size/piece;
    	remainder=size%piece;
    	filepiecesize=(char **)malloc(sizeof(char)*piece);
    	
    	for(i=1;i<=piece;i++)
    	{
    		if(i<piece)
    			filepiecesize[i]=(char *)malloc(size1);
    		else
    			filepiecesize[i]=(char *)malloc(size1+remainder);
    	}
    	for(i=1;i<=piece;i++)
    	{
    		if(i<piece)    cout<<"\nFirst : \n"<<size1<<endl;
    		else
    			cout<<"\nSecond : "<<size1+remainder<<endl;
    	}
    	
    	//OPEN THE FILE FOR READING
    	
    	fp=fopen(filename,"r");
    	fread(buffer1,size,1,fp);
    	
    	for(i=1;i<=piece;i++)
    	{
    		cout<<"\nEnter the new file for writing"<<endl;
    		cin>>filename1;
    		
    		if(i < piece)
    		{
    			if(i<piece)
    			{
    				fp2=fopen(filename1,"w");
    				fread(buffer1,size1,1,fp);
    				fwrite(buffer1,size1,1,fp2);
    			}
    			else
    			{
    				fp3=fopen(filename1,"w");
    				fread(buffer2,size1+remainder,1,fp);
    				fwrite(buffer2,size1+remainder,1,fp3);
    			}
    		}
    	}
    	fcloseall();
    }
    
    Custom Splitter
    Code:
    void ReadCustomSplit()
    {
    	cout<<"\nEnter the name of the file "<<endl;
    	cin>>filename;
    	_stat(filename,&buf);
    	size=buf.st_size;
    	Access(filename);
    	memory=size;
        CustomSplit(filename,memory);
    }
    
    
    #define MAXPIECESIZE 3
    
    void CustomSplit(const char *filename,unsigned  int size)
    {
    	cout<<"\nHow Many Pieces Do you Want ?"<<endl;
    	cin>>nofpiece);
    	if(MAXPIECESIZE<=3)
    	{
    		cout<<"\n\nTotal Size of the File  : "<<size<<endl;
    		size1=size/nofpiece;
    		remainder=size%nofpiece;
    		filepiecesize=(char **)malloc(sizeof(char)*nofpiece);
    		for(i=1;i<=nofpiece;i++)
    		{
    			if(i<nofpiece)
    				filepiecesize[i]=(char *)malloc(size1);
    			else
    				filepiecesize[i]=(char *)malloc(size1+remainder);
    		}
    		for(i=1;i<=nofpiece;i++)
    		{
    			if(i<nofpiece)
    				cout<<"\nFirst : \n"<<size1<<endl;
    			else
    				cout<<"\nSecond : \n"<<size1+remainder<<endl;
    		}
    		//OPEN THE FILE FOR READING
    		fp=fopen(filename,"r");
    		
    		//fread(buffer1,size,1,fp);
    		
    		for(i=1;i<=nofpiece;i++)
    		{
    			if(i < nofpiece)
    			{
    				//fp=fopen(filename,"r");
    				n=atoi(filename);  // Convert Array To Integer
    				strcpy(string,filename);
    				p+=n+1;
    				itoa(p,str,10);  // Convert Integer To Array
    				strcat(filename,str);
    				cout<<"New Name    : \n\n"<<i<<"\t"<<filename<<endl;
    				fp1=fopen(filename,"w");
    				fread(buffer1,size1,1,fp);
    				//ptr=(char *)memcpy(buffer4,buffer1,strlen(buffer1));
    				//if(ptr)
    				//{
    				//memmove(buffer4,buffer1,size1);
    				fwrite(buffer4,size1,1,fp1);
    				cout<<"\nmain : %u\n"<<size1<<endl;
    				
    				strcpy(filename,string);
    			}
    			else
    			{
    				n=atoi(filename);  // Convert Array To Integer
    				strcpy(string,filename);
    				p+=n+1;
    				itoa(p,str,10);  // Convert Integer To Array
    				strcat(filename,str);
    				cout<<("\nNew Name : "<<I<<"\t"<<filename<<endl;
    				fp2=fopen(filename,"w");
    				fread(buffer2,size1+remainder,1,fp);
    				cout<<"\nRemain : "<<size1+remainder<<endl;
    				//ptr=(char *)memcpy(buffer3,buffer2,strlen(buffer2));
    				//if(ptr)
    				//memmove(buffer3,buffer2,size1+remainder);
    				fwrite(buffer3,size1+remainder,1,fp2);
    				strcpy(filename,string);
    			}
    		}
    	}
    	else
    	{   
    		perror(" Check the number of pieces : ");
    		perror("Piece Not Greater than three(3) : ");
    	}
    	fcloseall();
    	getch();
    }
    
    // File Accessibility 
    
    // Check Whether File Exists or Not
    
    void Access(const char *filename)
    {
    	if(_access(filename,0)!=-1)
    		cout<<"\nFile Exist "<<endl;
    	else
    	{
    		ErrorChecking(error);
    		exit(1);
    	}
    }
     
  2. coderzone

    coderzone Super Moderator

    Joined:
    Jul 25, 2004
    Messages:
    736
    Likes Received:
    38
    Trophy Points:
    28
    Probably you missed the merger code.
     
  3. rahul.mca2001

    rahul.mca2001 New Member

    Joined:
    Feb 13, 2008
    Messages:
    103
    Likes Received:
    0
    Trophy Points:
    0
    where i the merger code
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice