Go4Expert

Go4Expert (http://www.go4expert.com/)
-   Assembly Language Programming (ALP) Forum (http://www.go4expert.com/forums/assembly-language-programming-forum/)
-   -   Will pay thru paypal....help needed..plzz (http://www.go4expert.com/forums/pay-paypalhelp-neededplzz-t7591/)

paritoshcoolkarni 28Nov2007 10:57

Will pay thru paypal....help needed..plzz
 
Hi every body..i am not sure whats wrong with the code. I have to submit this assignment today. If any body solves the program and the extra credit, I would pay him through paypal. This program is very important to me. Rit now this program just prints the prime nos till 9. later prints the unwanted nos. Please help me out. here is the program requirement:
************************************************** ***************
Overview
Write a program that will generate and print all prime numbers that are less than or equal to a user-defined limit. The program will contain 4 procedures: main and 3 procedures to read the user limit, generate the prime numbers, and print the prime numbers. In addition, the program will have 2 macros to make it more convenient to print text strings and print numeric output.



Details
The program will define an array of 1000 unsigned integers. The main procedure will call each of the other 3 procedures to do the following 3 tasks.

1. This procedure will call the macro to ask the user for an upper limit for the prime numbers. Then procedure will read in and check that the limit is not larger than 7919, the 1000th prime number. If it is larger, the procedure will call the macro to print a warning message that the limit is reset to 7919. Then the procedure will return the limit back to the main procedure.


2. This procedure will fill the array with prime numbers up to the limit. The array is passed into this procedure by address.


Algorithm to generate the prime numbers:


a. initialize the first 2 elements of the array to 2 and 3 (the first 2 prime numbers)

<!--[endif]-->

<!--[if !supportLists]--> b. <!--[endif]-->loop through all odd numbers less than or equal to the limit, starting with the number 5, and test each number this way:

<!--[if !supportLists]--> - Divide the test number by each array element (starting at 3) until the quotient is smaller than the divisor, or until the test number is divisible by the array element.

<!--[if !supportLists]--> - If the test number is divisible by the array element, it is not a prime number. Start the loop again with the next test number.

<!--[if !supportLists]--> - If the quotient becomes smaller than the divisor, the test number is a prime. Put it in the next available spot in the array and update the next available index. (Note that when you first start the loop, the next available index is at the third element of the array)

To see the calculation of the first several prime numbers, click here.


<!--[if !supportLists]--> 3. <!--[endif]-->This procedure will call the macro to print a header, and then print all the prime numbers in the array, 10 numbers per line. To print each prime number, the procedure will call a macro to print the number and a space. Again, the array should be passed by address to this procedure.


In addition to the 4 procedures, the program also has 2 macros.


The first macro makes printing text strings easier. If the name of the macro is ‘print’, the programmer can code: print str1 where str1 is a string which has been defined in the data segment.

The second macro prints a numeric value and a space. If the name of the macro is 'printNum', the programmer can code: printNum eax and the numeric value in eax will be printed followed by a space character.





To think about
- Don't forget to save and restore registers that are used by each macro and each procedure

- In 32-bit mode, the size of each data value on the stack is 32 bits or 4 bytes. This means that to access data in the stack, you should use multiples of 4 for the offset from EBP.


- For the array of prime numbers, you can use word or doubleword data. When you walk the array, just remember to increment by the right number for your data size.


Absolute must haves


- Use the stack to pass input arguments and return values. Except for the main procedure, all other procedures must get input data from the stack and return data through the stack. These procedures should not use any memory variables defined in the .data section, with the exception of string constants used to print to screen.1
- Implement the prime number algorithm given in this lab. Do not use a different algorithm.
- As before, document your program clearly. When it comes to parameter passing through the stack, clear documentation will save you a lot of headaches.
- Programs that do not assemble successfully will receive 1/3 credit at most.

1 Extra Credit (2 pts)
- Implement the procedures so the string constants are passed to them through the stack. This means these procedure does not directly fetch any data from the .data section

************************************************** **************
Code:

TITLE Lab 5                        (lab5.asm)

; Description:  Dot product calculation for 2D, 3D, or 4D vectors
; Name: Dhruv Gogna
; Date: 11/14/2007

INCLUDE Irvine32.inc

DIM EQU 1000                ; DIM is dimension of vector, can be 2, 3, or 4

.stack                    ; set up stack segment for procedure call (more details in module 7)

.data
myMessage BYTE "MASM program example",0dh,0ah,0
parray dword DIM DUP(?)
sum dword ?

.code
main PROC
    call Clrscr

    mov    edx,OFFSET myMessage
    call WriteString
    sub esp, 4
   
    call getnumber
    call writedec
   
    ;mov esi, OFFSET parray
    push OFFSET parray
   
    call fillarray
   
    ;pop OFFSET parray
    ;sub esi, 4
    ;mov eax, parray+1
    ;mov eax, parray+
    mov esi, OFFSET parray
    mov eax, [esi]
    add esi, 4
    add esi, 4
    mov eax, [esi]
    call crlf
    call crlf
    call crlf
    ;call writedec

    exit
main ENDP


getnumber PROC

    push ebp
    mov  ebp,esp  ; set ebp for this proc
    mov    edx,OFFSET myMessage
    call WriteString
   
   
    call readdec
    cmp eax, 7919
    jng L1
    mov eax, 7919
   
L1:    mov [ebp+8], eax
    pop ebp
    ;call writedec
    ret              ; pop return addr
                  ; and input params

getnumber ENDP



fillarray PROC
   
    push ebp
    mov  ebp,esp  ; set ebp for this proc
    mov esi, OFFSET parray
    ;add esi, 4
    ;mov eax, [esi]
    call crlf
    call crlf
    ;call writedec
   
    ;mov ebx, eax        ;eax has the limit of the array
    push eax            ;saving eax
    mov ebx, 2
    mov [esi], ebx
    add esi, 4
    mov ebx, 3
    mov [esi], ebx

   
    pop eax
    cmp eax, [esi]
    push eax
    ;push eax
    jle rtn
   
    ;push eax
    mov esi, OFFSET parray
    mov ebx, [esi]
    add esi, 4
    add ebx, [esi]
    ;mov ebx, eax
    push ebx            ;save eax
    mov eax, ebx
    mov edx, 0
    ;mov eax, ebx
    mov ecx, [esi]        ;divisor i.e. 3 is in [esi]
    div ecx                ;so mov it to ecx
   
    cmp eax, [esi]
    jle incre

divagain:
    mov edx, 0            ;start division again
    mov eax, [esi]
    add eax, 2
    push eax
    sub esi, 4
    mov ecx, [esi]
    add esi, 4
    div ecx
   
    cmp edx, 0
    jz divagain
    ;sub esi, 8
    cmp eax, 3
    jnz incr
   
    cmp eax, 5
    ;add esi, 4
    ;cmp eax, [esi]
    jnz incr
   
    cmp eax, 7
    jnz incr
       

    mov edx,OFFSET myMessage
    call WriteString
   
incre: add esi, 4        ;increment the number in array
    ;pop eax
    ;mov [esi], eax
    pop ebx
    jmp inr
incr:    pop ebx
        ;jmp ir
inr:    mov [esi], ebx   
   
    ;pop eax
L1:    pop ebx
    cmp [esi], ebx
    push ebx
    ;jle divagain
    jna divagain
       
       
    mov edx,OFFSET myMessage
    call WriteString
   
rtn: pop ebp
    pop eax
   
    mov esi, OFFSET parray
    ;add esi, 4
    ;add esi, 4
    ;add esi, 4
    add esi, 16
    mov eax, [esi]
    call crlf
    call writedec
    ret
fillarray ENDP

END main


shabbir 28Nov2007 17:34

Re: Will pay thru paypal....help needed..plzz
 
Duplicate of Will pay thru pay....help needed..plzz. Thread closed.


All times are GMT +5.5. The time now is 16:15.