Go4Expert (http://www.go4expert.com/)
-   Win32 (http://www.go4expert.com/forums/win32/)
-   -   Updating GUI Window after reading Each Channels (http://www.go4expert.com/forums/updating-gui-window-reading-channels-t11294/)

rkannasri 12Jun2008 19:37

Updating GUI Window after reading Each Channels
Hi All, Iam new to Win32 programming. I am developing GUI to read some channels.

Iam able to generate the GUI with Seperate read/write Buttons for each Channel. Iam able to read/write the channels using those buttons.

So I kept one single button for Reading and Single button for Writing the Channels. when I click the Single Buttons for reading and writing I am able to read/write to the channels. To achieve this, I have used WM_COMMAND Message i.e in a for loop I use the SendMessage() funtion to generate the button click for each Channels. (make a resemblence of clicking the Seperate Button for each channel.) I went to this approach because My main thread will be listening on the Serial Port for Response . Once the response comes I will generate the next WM_COMMAND message.

Here Comes my issue. The GUI window which is used to read/write the channels is updated,when the Single read/write button is clicked only after all the channels are read/write. But I want the GUI to get updated as soon as one channel data is read and so on.

Thanks in Advance.

shabbir 12Jun2008 22:51

Re: Updating GUI Window after reading Each Channels
You submitted as an article and I have moved it to forum for discussion

All times are GMT +5.5. The time now is 03:56.