This is a simple robot simulation of showing how the robot move in a maze:

Code:
#include <iostream>
#include <conio.h>
#include <iomanip>
#include <vector>
#define FALSE 0
#define TRUE 1

using namespace std;
static int steps;
int n,colsend,rowend,column,row,blockrow,blockcol,;

// Symbols:
// '.' = open
// '#' = blocked
// 'R' = robot
// 'X' = goal
// '+' = path

void displaymaze(vector<vector<char> >);
void display(vector<vector<char> >);
int find_path(int x, int y,vector<vector<char> >);


int main()
{   
    int choice,numsquare,numblock;
    int limit = 1;
    int nonvisit = 0;
    
    cout <<"Set the value of n x n squares area:"<<endl;
    cout <<"Enter the value for n:";
    cin >> n;
    vector<vector<char> > square(n,vector<char>(n,'.'));
  
 display(square);   
cout<<"\nThis is the square area robot could move."<<endl;
cout <<"\nNow specific the robot starting point and destination to move:"<<endl;

cout <<"Enter which row to start(starting from 0) :";
do{
cin >> row;
if(row > (n-1) || row<0)
cout<<"The row size is not in range,please enter again:";
}while(row > (n-1) || row<0);
cout <<"Enter which column to start(starting from 0) :";
do{
cin >> column;
if(column > (n-1) || column <0)
cout<<"The column size is not in range,please enter again:";
}while(column > (n-1) || column <0);

cout <<"Enter which row to end(starting from 0) :";
do{
cin >> rowend;
if(rowend > (n-1)||rowend <0)
cout<<"The column size is not in range,please enter again:";
}while(rowend >(n-1)||rowend <0);
cout <<"Enter which column to end(starting from 0) :";
do{
cin >> colsend;
if(colsend > (n-1)||colsend <0)
cout<<"The column size is not in range,please enter again:";
}while(colsend > (n-1)||colsend <0);
system("cls");


cout<<"The row and column of the starting point is ("<<row<<","<<column<<")"<<endl;
cout<<"The row and column of the destination is ("<<rowend<<","<<colsend<<")"<<endl;
square[row][column]='R';
square[rowend][colsend]='X';
display(square); 
cout <<"Run the maze area with or without block:"<<endl;
cout <<"1.Without block"<<endl;
cout <<"2.With block"<<endl;
cout <<"Enter your selection <1><2>";
cin >> choice;

if(choice ==1)
{
   system("cls");

    if ( find_path(row, column,square) == TRUE )
       { 
       cout<<"Success!\n";
       }
    else
        cout<<"Failed\n";
      
    cout<<"Total Steps"<<steps;
    
}

if(choice ==2)
{   
    system("cls");
    cout <<"How many block to be insert:"<<endl;
    cout <<"1.One"<<endl;
    cout <<"2.More than one"<<endl;
    cout <<"Enter your selection <1>/2>";
    cin >>numsquare;
if(numsquare==1)
{
   cout <<"Which position to insert the block:"<<endl;
   cout <<"Block row:";
   cin >> blockrow;
   cout <<"Block column:";
   cin >> blockcol;
   square[blockrow][blockcol]='#';
   if ( find_path(row, column,square) == TRUE )
       { 
       cout<<"Success!\n";
       }
    else
        cout<<"Failed\n";
      
    cout<<"Total Steps"<<steps;
}
if(numsquare==2)
{
   cout <<"How many block to be insert:"<<endl;
   cin >> numblock;
   while(limit<=numblock)
   {cout <<"Which position to insert the block "<<limit<<":"<<endl;
   cout <<"Block row:";
   cin >> blockrow;
   cout <<"Block column:";
   cin >> blockcol;
   square[blockrow][blockcol]='#';
   limit++;
   }

if ( find_path(row, column,square) == TRUE )
       { 
       cout<<"\nSuccess!\n";
       }
    else
        cout<<"Failed\n";
      
    cout<<"Total Steps"<<steps<<endl;
}


}
    
    
    
    getch();
    return 0;
}
// main()


void displaymaze(vector<vector<char> >maze)
{
    cout<<"MAZE:\n";
    
     for(int a=0;a<n;a++)
    {cout<<setw(7);
    for(int b=0;b<n;b++)
    {      cout<<maze[a][b];
           cout<<setw(3);
            }
            cout<<endl;}
            
    return;
}

void display(vector<vector<char> >square)
{                          
for(int x=0;x<n;x++)
{cout<<setw(7);
for(int y=0;y<n;y++)
{
cout << square[x][y];
cout<<setw(3);
}
cout<<endl;
}
}


int
find_path(int x, int y,vector<vector<char> >square)
{
     int nonvisit = 0;       
    // If x,y is outside maze, return false.
    if ( x < 0 || x > n - 1 || y < 0 || y > n - 1 ) return FALSE;
// If x,y is the goal, return true.

    
    if ( square[y][x] == 'X') 
    {   
         displaymaze(square);
         for(int e=0;e<n;e++)
{
   for(int f=0;f<n;f++)
   {
      if(square[e][f]=='.')
      {
        nonvisit+=1;}
      
      }
}cout<<"Total non visited steps"<<nonvisit<<endl;
         return TRUE;}
         
         
                
// If x,y is not open, return false.
    if ( square[y][x] != '.' && square[y][x] != 'R' ) return FALSE;
    
    
    // Mark x,y part of solution path.
    square[y][x] = '+';
    steps++;


    // If find_path North of x,y is true, return true.
    if ( find_path(x, y - 1,square) == TRUE ) return TRUE;

    // If find_path East of x,y is true, return true.
    if ( find_path(x + 1, y,square) == TRUE ) return TRUE;

    // If find_path South of x,y is true, return true.
    if ( find_path(x, y + 1,square) == TRUE ) return TRUE;

    // If find_path West of x,y is true, return true.
    if ( find_path(x - 1, y,square) == TRUE ) return TRUE;

    //mark the repeat steps
   
   
    square[y][x]='x';

    return FALSE;


}
Here is the problem, if the selection is move the robot without block in the maze ,there would be some area of the maze without traversed by the robot .For example if the size of the maze is 4 * 4 ,the starting point of the robot is 0,0) and the end point is(3,3),move the robot in maze without block.The result would be

+ + + +
. . . +
. . . +
. . . X

"." is the area of not traverse by the robot.So,now i want to alter execution of the robot to traverse all the area of the maze before reach the end,no matter which start and end point had initialized.Anyway how to do it ?