Hello every one, I am using visual C++ tool to debug the following code. However, during a line by line debug, the execution flow DOES NOT move to (#if defined INTEL_W32 ). I am using visual C++ on windows XP .
Can any one kindly tell me what is the MEANING of

#if defined INTEL_W32
===============================================
Debugging following program:

Code:
#if defined INTEL_W32

static Boolean fFirstTime = FALSE;
UInt32 ulLinearAddress;
UInt32 offset;

// Always register the atexit routine at least once, so any allocated
// resources are guaranteed to be released and freed. The function
// halpFreeLinearAddress is fully reentrant, so it can be called
// multiple times, in any order, without causing any harm.
if (!fFirstTime)
{ fFirstTime = TRUE;
printf("fFirstTime = %d \n",fFirstTime); // added
atexit(halpFreeLinearAddress);
}


// Use the configured register address to retrieve the linear address.
// NOTE: for PCI the register address should be zero, causing the VxD
// to locate the S1D13A05 in PCI address space.

if (HalInfo.dwRegisterAddress > HalInfo.dwMemoryAddress)
{
	gnHalErrCode = halpGetLinearAddress(HalInfo.dwMemoryAddress, &ulLinearAddress);
	
	
	
	if (gnHalErrCode != ERR_NONE)
		return FALSE;
	
	offset = HalInfo.dwRegisterAddress - HalInfo.dwMemoryAddress;
	
	if (offset == 0)
		offset = 0x200000;
	
	gpHalMemAddr = (pvUInt32) ulLinearAddress;
	gpHalRegAddr = (pvUInt32)(ulLinearAddress + offset);
	
	
}
else
{
	gnHalErrCode = halpGetLinearAddress(HalInfo.dwRegisterAddress, &ulLinearAddress);
	
	if (gnHalErrCode != ERR_NONE)
		return FALSE;
	
	offset = HalInfo.dwMemoryAddress - HalInfo.dwRegisterAddress;
	
	if (offset == 0)
		offset = 0x200000;
	
	gpHalRegAddr = (pvUInt32) ulLinearAddress;
	gpHalMemAddr = (pvUInt32)(ulLinearAddress + offset);
	
	printf ("<<<<<<<<<gpHalMemAddr, %d \n",gpHalMemAddr); // added
	printf ("<<<<<<<<<gpHalRegAddr, %d \n",gpHalRegAddr); //added
	
	
}

if (pReg)
*pReg = (UInt32) gpHalRegAddr;

if (pMem)
*pMem = (UInt32) gpHalMemAddr;
#else

// ********DEBUGGING WILL CONTINUE FROM HERE ******

gpHalRegAddr = (pvUInt32) HalInfo.dwRegisterAddress; gpHalMemAddr = (pvUInt32) HalInfo.dwMemoryAddress;

if (pReg)
*pReg = HalInfo.dwRegisterAddress;


if (pMem)
*pMem = HalInfo.dwMemoryAddress;




#endif

return TRUE;

}

Last edited by shabbir; 25Jun2007 at 17:25.. Reason: Code block