lol yea


well there are certain types of flood attacks the mosic command basic ones are a DOS attack which means (Denial of Service Attack) or there is a


A UDP flood attack is a denial-of-service (DoS) attack using the User Datagram Protocol (UDP), a sessionless computer networking protocol.

Using UDP for denial-of-service attacks is not as straightforward as with the Transmission Control Protocol (TCP). However, a UDP flood attack can be initiated by sending a large number of UDP packets to random ports on a remote host. As a result, the distant host will:

* Check for the application listening at that port;
* See that no application listens at that port;
* Reply with an ICMP Destination Unreachable packet.

Thus, for a large number of UDP packets, the victimized system will be forced into sending many ICMP packets, eventually leading it to be unreachable by other clients. The attacker may also spoof the IP address of the UDP packets, ensuring that the excessive ICMP return packets do not reach him, and anonymizing the attacker's network location(s).

This attack can be managed by deploying firewalls at key points in a network to filter out unwanted network traffic. The potential victim never receives and never responds to the malicious UDP packets because the firewall stops them.


Download NET TOOLS and it comes with a UDP flood attack also

one good DOS HTTP flood attack i like the most is called
DOSHTTP download it


below is 2 serial keys that are able to use forever


DH10A-0064-5612-1234-37B5-9701

DH10A-0064-6666-6666-1BF7-1419